ERW Pipe Process in Welding Machine
The ERW welding machine technology is used to realize the high frequency welding of the electromechanical system. The high-frequency welding equipment is composed of a high-frequency welding machine and a forming machine. A high frequency welding machine is usually made up of two parts of high frequency generator and feed device. The effect is to produce high frequency current and control it. By extrusion roll frame, the function of the molding machine is high frequency current. The extrusion and melting part eliminates the oxide and impurities on the surface of the steel and makes the steel plate completely integrated into one.
ERW pipe
High frequency generator
In the past, the use of high-frequency welded pipe unit is the three loop: high-frequency generator; solid state inverter; electronic high-frequency oscillator, and then basically improved to a single loop. There are many ways to adjust the output power of high frequency oscillator, such as autotransformer, reactance method, thyristor method and so on.
Feeding device
This is to transmit high-frequency current to the pipeline, including electrode contacts, inductors and resistors. The contact metal welds usually use wear-resistant copper tungsten electrode contacts, and induction welding is used on copper induction rings. The main component of the resistor is the magnetic core, whose function is to increase the inductance on the surface of the tube, so as to reduce the invalid current and improve the welding speed. The impedance of ferrite core requires that the Curie temperature is not less than 310 C, and Curie temperature is an important indicator of the core. The higher the Curie temperature, the closer you can, the closer to the weld, the closer to, the higher the efficiency of the welding.
http://www.xysteelpipe.com/info/ERW-Pipe-Process-in-Welding-Machine-1108-1.htm
ERW pipe
High frequency generator
In the past, the use of high-frequency welded pipe unit is the three loop: high-frequency generator; solid state inverter; electronic high-frequency oscillator, and then basically improved to a single loop. There are many ways to adjust the output power of high frequency oscillator, such as autotransformer, reactance method, thyristor method and so on.
Feeding device
This is to transmit high-frequency current to the pipeline, including electrode contacts, inductors and resistors. The contact metal welds usually use wear-resistant copper tungsten electrode contacts, and induction welding is used on copper induction rings. The main component of the resistor is the magnetic core, whose function is to increase the inductance on the surface of the tube, so as to reduce the invalid current and improve the welding speed. The impedance of ferrite core requires that the Curie temperature is not less than 310 C, and Curie temperature is an important indicator of the core. The higher the Curie temperature, the closer you can, the closer to the weld, the closer to, the higher the efficiency of the welding.
http://www.xysteelpipe.com/info/ERW-Pipe-Process-in-Welding-Machine-1108-1.htm
评论
发表评论